Administrator Guide

Parameters
vlan vlan-range Enter the keyword vlan then the VLAN numbers. The range
is from 1 to 4094.
max-age
seconds
Enter the keywords max-age then the time interval, in
seconds, that Dell Networking OS waits before refreshing
configuration information. The range is from 6 to 40
seconds. The default is
20 seconds.
Defaults 20 seconds
Command
Modes
CONFIGURATION (conf-pvst)
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.2.1.1 Introduced.
Related
Commands
vlan bridge-priority — sets the bridge-priority value.
vlan forward-delay — changes the time interval before Dell Networking OS
transitions to the forwarding state.
vlan hello-time — changes the time interval between BPDUs.
show spanning-tree pvst — displays the PVST+ configuration.
1222
Per-VLAN Spanning Tree Plus (PVST+)