Administrator Guide

Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Available on the C-Series and S-Series.
Version 7.5.1.0 Added support for the DSCP Marking option.
pre-Version
7.4.1.0
Introduced.
Usage
Information
To access this command, enter the class-map command. After the class map is
identified, you can configure the match criteria.
Related
Commands
class-map — identifies the class map.
match mac dot1p
Configure a match criterion for a class map based on a dot1p value.
Z9000
Syntax
match mac dot1p {dot1p-list}
Parameters
dot1p-list Enter a dot1p value. The range is from 0 to 7.
Defaults none
Command
Modes
CLASS-MAP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Available on the C-Series and S-Series.
Version 7.5.1.0 Added support for the DSCP Marking option.
pre-Version
7.4.1.0
Introduced.
Usage
Information
To access this command, enter the class-map command. After the class map is
identified, you can configure the match criteria.
Related
Commands
class-map — identifies the class map.
Quality of Service (QoS)
1239