Administrator Guide

• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Example
Dell#show qos wred-profile
Wred-profile-name min-threshold max-threshold max-
drop-rate
wred_drop 0 0
100
wred_teng_y 238 2378
100
wred_teng_g 238 2378
50
wred_fortyg_y 238 2378
50
wred_fortyg_g 238 2378
25
ecn 594 5941
50
Dell#
test cam-usage
Check the Input Policy Map configuration for the CAM usage.
Z9000
Syntax
test cam-usage service-policy input policy-map stack-unit
{[number port-set portpipe number] | [all]}
Parameters
policy-map Enter the policy map name.
stack-
unitnumber
(OPTIONAL) Enter the keyword stack-unit then the stack-
unit slot number.
port-set
portpipe
number
Enter the keywords port-set then the stack-unit port pipe
number. The range is from 0 or 1.
stack-unit all (OPTIONAL) Enter the keywords stack-unit all to indicate
all stack-unit.
Defaults none
Quality of Service (QoS)
1261