Administrator Guide

ip poison-reverse
Set the prefix of the RIP routing updates to the RIP infinity value.
Z9000
Syntax
ip poison-reverse
To disable poison reverse, use the no ip poison-reverse command.
Defaults Disabled.
Command
Modes
INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.6.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1
Introduced on the E-Series.
Related
Commands
ip split-horizon — sets the RIP routing updates to exclude routing prefixes.
ip rip receive version
To receive specific versions of RIP, set the interface. The RIP version you set on the interface overrides
the version command in ROUTER RIP mode.
Z9000
Syntax
ip rip receive version [1] [2]
To return to the default, use the no ip rip receive version command.
Parameters
1 (OPTIONAL) Enter the number 1 for RIP version 1.
1288
Routing Information Protocol (RIP)