Administrator Guide

Version 7.5.1.0 Introduced on the C-Series.
Version 6.1.1.0 Introduced on the E-Series.
rmon event
Add an event in the RMON event table.
Z9000
Syntax
rmon event number [log] [trap community] [description string]
To disable RMON on an interface, use the no rmon event number command.
Parameters
number Assign an event number in integer format. The range is from
1 to 65535. You must ensure that the value you enter is
unique in the RMON event table.
log (OPTIONAL) Enter the keyword log to generate an RMON
event log. This option sets the eventType to either log or
log-and-snmptrap in the RMON event table. The default is
None.
trap
community
(OPTIONAL) Enter the keyword trap followed by the SNMP
community string to generate SNMP traps for an RMON
event entry. This option sets the eventType to either
snmptrap or log-and-snmptrap in the RMON event table. In
addition to the SNMP traps, this option also generates a
syslog.
description
string
(OPTIONAL) Enter the keyword description then a string
describing the event.
owner name (OPTIONAL) Enter the keyword owner then the name of the
owner of this event.
Defaults As noted in the Parameters section.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Remote Monitoring (RMON)
1311