Administrator Guide

Authorization and Privilege Commands
To set command line authorization and privilege levels, use the following commands.
authorization
Apply an authorization method list to terminal lines.
Z9000
Syntax
authorization {exec | commands {level | role role-name}}
method-list
Parameters
exec Enter the keyword exec to apply an EXEC level authorization
method list.
commands
{level | role
role-name}
Enter the keyword commands followed by either a privilege
level for accounting of commands executed at that privilege
level, or enter the keyword role then the role name for
authorization of commands executed by a user with that
user role.
method-list Enter a method list that you defined using the aaa
accounting exec
or aaa accounting commands.
Defaults none
Command
Modes
LINE
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.5(0.0) Added support for roles on the Z9000, S6000, S4820T,
S4810, and MXL.
Version 9.2(1.0) Introduced on the Z9500.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
Version 6.3.1.0 Introduced on the E-Series.
1346
Security