Administrator Guide

LACP 0 0x00000000 0x00000000 0x8000383f 0x00000000 35
DHCP 0 0x00000000 0x00000000 0x800000c2 0x0000c000 37
V6RAD 0 0x00000433 0x00030000 0x00000000 0x00000000 0
Unidentified Client0 0x006e0002 0x00000000 0x00000000
0x00000000 0
Dell#
show system
Display the status of all stack members or a specific member.
Z9000
Syntax
show system [brief | stack-unit unit-id]
Parameters
brief (OPTIONAL) Enter the keyword brief to view an
abbreviated list of system information.
stack-unit unit-
id
(OPTIONAL) Enter the keywords stack-unit then the stack
member ID for information on that stack member.
The unit
ID range for the Z9000 is from 0 to 7.
stack-ports
status |
topology
(OPTIONAL) Enter the keywords stack-ports for
information about the status or topology of the S4810 stack
ports.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4(0.0) Added support for the disabled-ports parameter .
Version 9.0.2.0 Introduced on the S6000.
Version 9.0.0.0 Introduced on the Z9000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.4 The brief parameter no longer displays the current Reload
mode. To display Reload mode, use the show reload-type
command. Modified the show system stack-unit
command output to support Piece Part ID (PPID).
Version 8.3.11.1 Introduced on the Z9000.
Control and Monitoring
135