Administrator Guide

key
[encryption-
type] key
(OPTIONAL) Enter the keyword key then an optional
encryption-type and a string up to 42 characters long as the
authentication key. The RADIUS host server uses this
authentication key and the RADIUS daemon operating on
this switch.
For the encryption-type, enter either zero (0) or 7 as the
encryption type for the key entered. The options are:
• 0 is the default and means the password is not encrypted
and stored as clear text.
• 7 means that the password is encrypted and hidden.
Configure this parameter last because leading spaces are
ignored.
Defaults Not configured.
Command
Modes
• RADIUS SERVER GROUP
• CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.4.1.0 Added support for IPv6.
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Authentication key length increased to 42 characters.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.0
Introduced on the E-Series.
Usage
Information
To configure any number of RADIUS server hosts for each server host that is
configured, use this command. Dell Networking OS searches for the RADIUS hosts
in the order they are configured in the software.
The global default values for the timeout, retransmit, and key optional
parameters are applied, unless those values are specified in the radius-server
host or other commands. To return to the global default values, if you configure
Security
1375