Administrator Guide

Parameters
stack-unit (OPTIONAL) Enter the keywords stack-unit to view CPU
memory usage for the stack member designated by unit-id.
The unit ID range for the Z9000 is from 0 to 7.
page (OPTIONAL) Enter the keyword page to view 24 lines of text
at a time. Press the SPACE BAR to view the next 24 lines.
Press the ENTER key to view the next line of text.
When using the pipe command ( | ), enter one of these
keywords to filter command output. For details about
filtering commands, refer to CLI Basics.
save Enter the keyword save to save the command output.
flash: Save to local flash drive (flash://filename. A
maximum of 20 characters.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced save to the file options.
Version 7.6.1.0 Introduced on the S-Series.
Usage
Information
Without the page or stack-unit option, the command output is continuous.
To interrupt the command output, use Ctrl-z.
The save option works with other filtering commands. This allows you to save
specific information of a show command. The save entry must always be the last
option. For example: Dell#show tech-support |grep regular-expression
|except regular-expression | find regular-expression | save
flash://result
This display output is an accumulation of the same information that is displayed
when you execute one of the following show commands:
• show version
• show clock
• show running-config
Control and Monitoring
139