Administrator Guide

Usage
Information
This command is available with or without RBAC enabled. When RBAC is enabled
you can restrict access to audit and security logs based on the CLI sessions’ user
roles. If extended logging is disabled, you can only view system events, regardless
of RBAC user role.
When you enabled RBAC and extended logging:
• Only the system administrator role can execute this command.
• The system administrator and system security administrator roles can view
security events and system events.
• The system administrator role can view audit, security, and system events.
• The network administrator and network operator roles can view system events.
Examples
Dell(conf)#logging extended
Related
Commands
show logging auditlog — displays audit log, clear logging auditlog— clears audit log
logging facility
Configure the Syslog facility used for error messages sent to Syslog servers.
Z-Series
Syntax
logging facility [facility-type]
To return to the default values, use the no logging facility command.
Parameters
facility-type (OPTIONAL) Enter one of the following parameters:
• auth (authorization system)
• cron (Cron/at facility)
• deamon (system deamons)
• kern (kernel)
• local0 (local use)
• local1 (local use)
• local2 (local use)
• local3 (local use)
• local4 (local use)
• local5 (local use)
• local6 (local use)
• local7 (local use)
• lpr (line printer system)
• mail (mail system)
• news (USENET news)
• sys9 (system use)
Simple Network Management Protocol (SNMP) and Syslog
1489