Administrator Guide

ManualsBrandsDell ManualsComputer equipmentForce10 Z9000

1491

Table Of Contents

Version 9.2(0.0) Introduced on the M I/O Aggregator. This command is

supported in Programmable-Mux (PMUX) mode only.

Version 9.0.2.0 Introduced on the S6000.

Version

8.3.19.0

Introduced on the S4820T.

Version 8.3.11.1 Introduced on the Z9000.

Version 8.3.7.0 Introduced on the S4810.

Version 7.6.1.0 Introduced on the S-Series.

Version 7.5.1.0 Introduced on the C-Series.

E-Series legacy

command

Commands

default logging monitor — returns the logging monitor parameters to the default

setting.

logging on

Specify that debug or error messages are asynchronously logged to multiple destinations, such as the

logging buffer, Syslog server, or terminal lines.

Z-Series

Syntax

logging on

To disable logging to logging buffer, Syslog server and terminal lines, use the no

logging on command.

Defaults Enabled.

Command

Modes

CONFIGURATION

Command

History

This guide is platform-specific. For command information about other platforms,

refer to the relevant Dell Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.