Administrator Guide

HeartBeat Timeout: 3
UDP Port: 34998
HeartBeat Messages Sent: 1026
HeartBeat Messages Received: 1025
show vlt counters
Displays the counter information.
Z9000
Syntax
show vlt counters [arp| igmp-snoop | interface | mac | ndp]
Parameters
arp Enter the keyword arp to display the ARP counter
information for the VLT.
igmp-snoop Enter the keywords igmp-snoop to display the igmp-
snooping counter information for the VLT.
interface Enter the keyword interface to display the interface
counter information for the VLT.
mac Enter the keyword mac to display the MAC address counter
information for the VLT.
ndp Enter the keyword ndp to display the VLT counter
information for NDP.
Default Not configured.
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version 9.0.0.0 Introduced on the Z9000.
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Usage
Information
If you do not add a parameter such as arp or mac, the output displays all of the
counters.
Example
Dell# show vlt counter
Total VLT counters
1594
Virtual Link Trunking (VLT)