Administrator Guide

The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version 9.0.0.0 Introduced on the Z9000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.8.0 Introduced on the S4810.
Example
Dell# Dell(conf-if-vl-100)#show vlt detail
Local LAG Id Peer LAG Id Local Status Peer Status Active VLANs
------------ ----------- ------------ ------------
-------------
10 10 UP UP 100, 200, 300,
400,
show vlt inconsistency
Display run-time inconsistencies in the incoming interface (IIF) for spanned multicast routes.
Z9000
Syntax
show vlt inconsistency ip mroute
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version 9.2(0.0) Introduced on the M I/O Aggregator. This command is
supported in Programmable-Mux (PMUX) mode only.
Version 9.2(0.2) Introduced on the Z9000, S4810, and S4820T.
Example
Dell#show vlt inconsistency ip mroute
Spanned Multicast Routing IIF Inconsistency
Multicast Route LocalIIF PeerIIF
--------------- ---------- ---------
(22.22.22.200, 225.1.1.2) VLAN 5 VLAN 6
(*, 225.1.1.2) VLAN 15 te 0/5
Dell#
1596
Virtual Link Trunking (VLT)