Administrator Guide

clear counters ip access-group
Erase all counters maintained for access lists.
Z9000
Syntax
clear counters ip access-group [access-list-name]
Parameters
access-list-
name
(OPTIONAL) Enter the name of a configured access-list, up
to 140 characters.
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Increase the name string to accept up to 140 characters.
Prior to 7.8.1.0, names were up to 16 characters long.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1
Introduced on the E-Series.
ip access-group
Assign an IP access list (IP ACL) to an interface.
Z9000
Syntax
ip access-group access-list-name {in | out} [implicit-permit]
[vlan vlan-id]
To delete an IP access-group configuration, use the no ip access-group
access-list-name {in | out} [implicit-permit] [vlan vlan-id]
command.
176
Access Control Lists (ACL)