Administrator Guide

Version 8.1.1.0 Introduced on the E-Series ExaScale.
pre-Version
6.1.1.0
Introduced on the E-Series.
Example
Dell#show ip as-path-access-lists
ip as-path access-list acc
permit 750
deny 10
IP Community List Commands
IP community list commands are supported on the platform.
ip community-list
Enter COMMUNITY-LIST mode and create an IP community-list for BGP.
Z9000
Syntax
ip community-list comm-list-name
To delete a community-list, use the no ip community-list comm-list-name
command.
Parameters
comm-list-
name
Enter a text string as the name of the community-list, up to
140 characters.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Increased the name string to accept up to 140 characters.
Prior to 7.8.1.0, names are up to 16 characters long.
pre-Version
6.1.1.0
Introduced on the E-Series.
Access Control Lists (ACL)
269