Administrator Guide

description
Enter a description of the BGP routing protocol
Z9000
Syntax
description {description}
To remove the description, use the no description {description}
command.
Parameters
description Enter a description to identify the BGP protocol (80
characters maximum).
Defaults none
Command
Modes
ROUTER BGP
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
pre-7.7.1.0 Introduced.
Related
Commands
router bgp — enters ROUTER mode on the switch.
distance bgp
Define an administrative distance for routes.
Z-Series
Syntax
distance bgp external-distance internal-distance local-distance
To return to default values, use the no distance bgp command.
Border Gateway Protocol
381