Administrator Guide

path-count Enter the number paths supported. The range is from 2 to
64.
Defaults none
Command
Modes
CONFIGURATION-ROUTER-BGP-ADDRESS FAMILY
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.8.0 Introduced on the S4810.
Related
Commands
bgp add-path — allows the advertisement of multiple paths for the same address
prefix without the new paths implicitly replacing any previous ones.
neighbor advertisement-interval
Set the advertisement interval between BGP neighbors or within a BGP peer group.
Z-Series
Syntax
neighbor {ip-address | peer-group-name} advertisement-interval
seconds
To return to the default value, use the no neighbor {ip-address | peer-
group-name
} advertisement-interval command.
Parameters
ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted
decimal format.
peer-group-
name
Enter the name of the peer group to set the advertisement
interval for all routers in the peer group.
seconds Enter a number as the time interval, in seconds, between
BGP advertisements. The range is from 0 to 600 seconds.
The default is 5 seconds for internal BGP peers and 30
seconds for external BGP peers.
Defaults
• seconds = 5 seconds (internal peers)
• seconds = 30 seconds (external peers)
Border Gateway Protocol
385