Administrator Guide

Ipmacacl
number
Enter the keyword ipmacacl and then the number of FP
blocks for IP and MAC ACL. The range is from 0 to 6.
ecfmacl
number
Enter the keyword ecfmacacl and then the number of FP
blocks for ECFM ACL. The range is from 0 to 5.
Vman-qos|
vman-dual-qos
number
Enter the keyword evman-qos and then the number of FP
blocks for VMAN QoS. The range is from 0 to 6.
vman-dual-qos
number
Enter the keyword vman-dual-qos and then the number of
FP blocks for VMAN dual QoS. The range is from 0 to 4.
Ipv4pbr
number
Enter the keyword ipv4pbr and then the number of FP
blocks for ipv4pbr ACL. The range is from 0 to 8.
Openflow
number
Enter the keyword openflow and then the number of FP
blocks for open flow (multiples of 4). The range is from 0 to
8.
fcoeacl
number
Enter the keyword fcoeacl and then the number of FP
blocks for FCOE ACL. The range is from 0 to 6.
Iscsioptacl
number
Enter the keyword iscsioptacl and then the number of FP
blocks for iSCSI optimization ACL. The range is from 0 to 2.
l2acl number
ipv4acl number
ipv6acl
number,
ipv4qos
number l2qos
numberl2pt
number
ipmacacl
number
ecfmacl
number [vman-
qos | vman-
dual-qos
number]
ipv4pbr
numberopenflo
w {4|8} | fcoe
number
[iscsioptacl
number]
[vrfv4acl
number]
Allocate space to each CAM region.
Enter 4 or 8 for the number of OpenFlow FP blocks.
• 4: Creates 242 entries for use by the OpenFlow controller
(256 total entries minus the 14 entries reserved for
internal functionality)
• 8: Creates 498 entries for use by the OpenFlow controller
(512 total entries minus the 14 entries reserved for
internal functionality)
The fcoe range is 0–6 groups. Each group has 128 entries;
the value given must be an even number. This information is
stored in the NVRAM and is effective after rebooting the
switch.
Command
Modes
CONFIGURATION
478
Content Addressable Memory (CAM)