Administrator Guide

cpu
management
statistics
Enter the keywords cpu management statistics to
display the counters of the management port.
cpu sata-
interface
statistics
Enter the keywords cpu sata-interface statistics to
display the sata interface error counter statistics.
drops [unit
unit-number
[port port-
number | no]]
Enter the keyword drops to display internal drops on the
selected stack member. Enter the drops keyword to display
internal drops on the selected stack member. Option unit 0
followed by port 1-104 (in S6000) is based on internal/
hardware port number” and “option user-port 0-127 is to see
the drop using user port numbering convention.
fpga register Enter the keyword to display the register value of fpga
resgister details in S4810, Z9000 and S6000.
stack-port
port-number
Enter the keywords stack-port and a stacking port number
to select a stacking port for which to display statistics.
The
range is 0.
unit unit-
number
{counters |
details | port-
stats [detail] |
register}
Enter the keyword unit then 0 to 5 and then enter one of
the following keywords to troubleshoot errors on the
selected port-pipe and to give status on why a port is not
coming up to register level: counters, details, port-
stats [detail]
, or register.
TI monitor Enter the unit keyword to show information regarding the TI
register.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(0.2) Modified the drops keyword range, unit keyword range and
added the buffer and cpu management statistics
options.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.5 Added i2c statistics and sata-interfaces statistics.
Debugging and Diagnostics
505