Administrator Guide

lease
Specify a lease time for the addresses in a pool.
Z9000
Syntax
lease {days [hours] [minutes] | infinite}
Parameters
days Enter the number of days of the lease. The range is from 0 to
31.
hours Enter the number of hours of the lease. The range is from 0
to 23.
minutes Enter the number of minutes of the lease. The range is from
0 to 59.
infinite Specify that the lease never expires.
Defaults 24 hours
Command
Modes
DHCP <POOL>
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the C-Series and S-Series.
netbios-name-server
Specify the NetBIOS Windows Internet Naming Service (WINS) name servers, in order of preference, that
are available to Microsoft Dynamic Host Configuration Protocol (DHCP) clients.
Z9000
Syntax
netbios-name-server address [address2...address8]
Parameters
address Enter the address of the NETBIOS name server. You may
enter up to eight, in order of preference.
Defaults none
Dynamic Host Configuration Protocol (DHCP)
521