Administrator Guide

Version 9.4.
(0.0)
Introduced on the S-Series and Z-Series.
Usage
Information
Use this command to delete one or all dynamically learned host table entries
corresponding to a specific VRF.
Example
Dell#clear host vrf jay dell
Dell#clear host vrf jay *
ip domain-list
Adds a domain name to the DNS list. This domain name is appended to incomplete host names in DNS
requests corresponding to a specific VRF.
Z9000
Syntax
ip domain-list [vrf vrf-name] name
To remove a domain name from DNS list, use the no ip domain-list [vrf
vrf-name] name command.
Parameters
vrf vrf-name (Optional) Enter the key word vrf and then the name of the
VRF to add a domain name to the DNS list corresponding to
that VRF.
name Enter the name of the domain to be appended to the DNS
list corresponding to the VRF.
Defaults None
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Introduced on the S-Series and Z-Series.
Usage
Information
Use this command to add domain names to the DNS lists corresponding to a
specific VRF. You can add up to a maximum of six domain names to the DNS list
corresponding to a VRF. This domain is used to complete the unqualified host
names.
Example
Dell(conf)#ip domain-list vrf jay dell.com
Dell(conf)#ip domain-list vrf jay force10.com
Dynamic Host Configuration Protocol (DHCP)
527