Administrator Guide

ip domain-name
Configures the default domain corresponding to a specific VRF. This domain is appended to the in
complete DNS requests corresponding to the specified VRF.
Z9000
Syntax
ip domain-name [vrf vrf-name] name
To undo the domain name configuration corresponding to a specific VRF, use the
no ip domain-name [vrf vrf-name] name command.
Parameters
vrf vrf-name (Optional) Enter the key word vrf and then the name of the
VRF to configure the domain corresponding to that VRF.
name Enter the name of the domain to be appended to the in
complete DNS requests corresponding to the specified VRF.
Defaults None
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.4.
(0.0)
Introduced on the S-Series and Z-Series.
Usage
Information
Use this command to configure a domain name corresponding to a VRF. This
domain is appended to the in complete DNS requests corresponding to the
specified VRF.
Example
Dell(conf)#ip domain-name vrf jay dell.com
ip host
Configures a mapping between the host name server and the IP address for a specific VRF. This mapping
information is used by the name-to-IP address table to resolve host names.
Z9000
Syntax
ip host [vrf vrf-name] name ip-address
To undo the host name server to IP address mapping for VRFs, use the no ip
host [vrf vrf-name] name ip-address command.
528
Dynamic Host Configuration Protocol (DHCP)