Administrator Guide

Parameters
binding
Clears the binding table.
source-
address-
validation
discard-
counters
Clears discard counters from all the interfaces configured
with IP Source Guard.
interface
interface
(OPTIONAL) Specifies an interface to clear the discard
counters.
Enter any of the following keywords and slot/port or number
information:
For a port channel interface, enter the keywords port-
channel
then a number. The range is from 1 to 128.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Defaults none
Command
Modes
EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.6(0.0)
Added the keywords discard-counters, interface, and
the variable interface on the S4810, S4820T, S5000, S6000,
Z9000, Z9500.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the E-Series.
Version 8.2.1.0 Introduced on the C-Series and S-Series.
532
Dynamic Host Configuration Protocol (DHCP)