Administrator Guide

Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.3.1.0 Introduced on the E-Series.
Version 7.2.1.0 Introduced on the C-Series and S-Series.
show ip dhcp snooping
Display the contents of the DHCP binding table or display the interfaces configured with IP Source Guard.
Syntax
show ip dhcp snooping [binding | source-address-validation
[discard-counters [interface interface]]]
Parameters
binding
Display the binding table.
source-
address-
validation
Display the interfaces configured with IP Source Guard.
discard-
counters
(OPTIONAL) Display the number of dropped packets.
interface
interface
(OPTIONAL) Specifies an interface to show the discard
counters.
Enter any of the following keywords and slot/port or number
information:
For a Port Channel interface, enter the keywords port-
channel
then a number. The range is from 1 to 128.
For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Dynamic Host Configuration Protocol (DHCP)
541