Administrator Guide

Enter the keywords port-set port-pipe then the port
pipe number. The range is from 0 to 5.
hg-seed seed-
value stack-
unit
Z-Series only: Enter the keywords hg-seed then the hash
algorithm seed value. The range is from 0 to 2147483646.
Enter the keywords stack-unit then the stack unit number.
The range is from 0 to 7.
Enter the keywords port-set then the stack-unit port-pipe
number. The range is from 0 to 5.
lag hash
algorithm
Z-Series only: Enter the keywords hg-seed . The range is
from 0 to 47.
nh-ecmp
hashalgorithm
value
(OPTIONAL) Enter the keyword nh-ecmp followed by the
ECMP hash algorithm value.
stack-unit
number
(OPTIONAL) : Enter the keywordstack—unit followed by the
stack—unit slot number.
ip-sa-mask
value
(OPTIONAL) Enter the keyword ip-sa-mask followed by the
ECMP/LAG hash mask value. The range is from 0 to FF.
ip-da-mask
value
(OPTIONAL) Enter the keyword ip-da-mask followed by the
ECMP/LAG hash mask value. The range is from 0 to FF.
Defaults IPSA and IPDA mask value is FF for the stack-unit.
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version
8.3.10.0
Introduced on the S4810.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Added the nh-ecmp option.
548
Equal Cost Multi-Path (ECMP)