Administrator Guide

show gvrp
Display the GVRP configuration.
Z9000
Syntax
show gvrp [brief | interface]
Parameters
brief (OPTIONAL) Enter the keyword brief to display a brief
summary of the GVRP configuration.
interface (OPTIONAL) Enter the following keywords and slot/port or
number information:
• For a Port Channel interface, enter the keywords port-
channel then a number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE then the slot/port information.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on C-Series, E-Series, and S-Series
Usage
Information
If no ports are GVRP participants, the message output changes from GVRP
Participants running on <port_list> to GVRP Participants running
on no ports
.
Example
R3#show gvrp brief
GVRP Feature is currently enabled.
Port GVRP Status Edge-Port
----------------------------------------------
Gi 3/0 Disabled No
Gi 3/1 Disabled No
Gi 3/2 Enabled No
Gi 3/3 Disabled No
GARP VLAN Registration (GVRP)
585