Administrator Guide

Power-cycling the unit(s).
Dell#
show boot system
Displays information about boot images currently configured on the system.
Z9000
Syntax
show boot system {stack-unit {0-11 | 0-7 | 0-5 | all}}
Parameters
all Enter the keyword all to display the boot image information
for all line cards and rpms.
stack-unit Enter the keyword stack-unit followed by a number to
display boot image information for a stack-unit.
The Z9000 range is from 0 to 7.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000
Version 8.3.7.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the C-Series and E-Series.
Example
Dell#show boot system stack-unit 0
Current system image information in the system:
=============================================
Type Boot Type A B
---------------------------------------------------------------
-
Stack-unit 0 FLASH BOOT 9-0(2-1) 9-0(2-0)
File Management
65