Administrator Guide

management crypto-policy
Apply the crypto policy to management traffic.
Z9000
Syntax
management crypto-policy name
To remove the management traffic crypto policy, use the no management
crypto-policy name command.
Parameters
name Enter the name for the crypto policy..
Defaults none
Command
Modes
CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.2(0.2) Introduced on the Z9000, S4810, and S4820T.
match
Apply an match filter to the crypto policy.
Z9000
Syntax
match seq-num tcp [sourceip address | ipv6 address {mask}
{source-port number}] [destination ip address | ipv6 address
{mask} {destination-port number}]
To remove the match filter for the crypto map, use the no match seq-num tcp
[source ip address | ipv6 address {mask} {source-port number}]
[destination ip address | ipv6 address {mask} {destination-port
number
}] command.
Parameters
seq-num Enter the match command sequence number.
sourceip-
address | ipv6
address
Enter the keyword source then the IPv4 or IPv6 address for
the source.
mask Enter the mask prefix length in /nn format.
712
Internet Protocol Security (IPSec)