Administrator Guide

Default 100
Command
Modes
EXEC
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Related
Commands
ipv6 flowlabel-zero — Configure IPv6 address auto-configuration for the
management interface.
show ipv6 fib stack-unit
View all FIB entries.
Z9000
Syntax
show ipv6 fib stack-unit unit-number [summary | ipv6-address]
Parameters
slot-number Enter the number of the stack unit. The range is from 0 to 11.
summary (OPTIONAL) Enter the keyword summary to view a summary
of entries in IPv6 cam.
ipv6-address Enter the IPv6 address in the x:x:x:x::x/n format to display
networks that have more specific prefixes. The range is
from /0 to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
IPv6 Basics
819