Administrator Guide

show ipv6 route
Displays the IPv6 routes.
Z9000
Syntax
show ipv6 route [ipv6-address prefix-length] [hostname] [all]
[bgp as number] [connected] [isis tag] [list prefix-list name]
[ospf process-id] [rip] [static] [summary]
Parameters
ipv6-address
prefix-length
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format
then the prefix length in the /x format. The range is from /0
to /128.
NOTE: The :: notation specifies successive hexadecimal
fields of zeros.
hostname (OPTIONAL) View information for this IPv6 routes with Host
Name.
all (OPTIONAL) View information for all IPv6 routes.
bgp (OPTIONAL) View information for all IPv6 BGP routes.
connected (OPTIONAL) View only the directly connected IPv6 routes.
isis (OPTIONAL) View information for all IPv6 IS-IS routes.
list (OPTIONAL) View the IPv6 prefix list.
ospf (OPTIONAL) View information for all IPv6 OSPF routes.
rip (OPTIONAL for E-Series only) View information for all IPv6
RIP routes.
static (OPTIONAL) View only routes configured by the ipv6
route
command.
summary (OPTIONAL) View a brief list of the configured IPv6 routes.
Defaults none
Command
Modes
• EXEC
• EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.0.0 Introduced on the Z9000.
Version
8.3.19.0
Introduced on the S4820T.
IPv6 Basics
825