Administrator Guide

Usage
Information
When you execute this command, IS-IS does not download the route to the
routing table if the same route was redistributed into IS-IS routing protocol on the
same router.
domain-password
Set the authentication password for a routing domain.
Z9000
Syntax
domain-password [hmac-md5 | encryption-type] password
To disable the password, use the no domain-password command.
Parameters
hmac-md5 (OPTIONAL) Enter the keywords hmac-md5 to encrypt the
password using MD5.
encryption-
type
(OPTIONAL) Enter 7 to encrypt the password using DES.
password Enter an alphanumeric string up to 16 characters long. If you
do not specify an encryption type or hmac-md5
keywords, the password is processed as plain text which
provides limited security.
Defaults No default password.
Command
Modes
ROUTER ISIS
Command
History
This guide is platform-specific. For command information about other platforms,
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0 Introduced on the S6000.
Version
8.3.19.0
Introduced on the S4820T.
Version
8.3.12.0
Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 6.3.1.0 Introduced.
Usage
Information
The domain password is inserted in Level 2 link state PDUs (LSPs), complete
sequence number PDUs (CSNPs), and partial sequence number PDUs (PSNPs).
846
Intermediate System to Intermediate System (IS-IS)