Administrator Guide

Usage
Information
This interval cannot be configured per high-Gigabit port channel and is applicable
for all of the high-Gigabit port channels on the system.
show hg-link-bundle-distribution
Display the traffic-handling and utilization of the member interfaces of the high-Gigabit port channel or
trunk group. This command is supported on the Z9000 platform.
Syntax
show hg-link-bundle-distribution slot slotId npuUnit npuUnitId
hg-port-channel portChannelId
Parameters
slot slotId Enter the keyword slot followed by the slot ID of the high-
Gigabit port channel. For Z9000, the only valid slot number
is 0.
npuUnit
npuUnitId
Enter the keyword npuUnit followed by the NPU value. The
range is from 0-5.
hg-port-
channel
portChannelId
Enter the keyword hg-port-channel followed by the
unique ID of the port channel. Number of hg-port-channels
vary for switch NPU and fabric NPUs.
Command
Modes
EXEC, EXEC Privilege
Command
History
Version 9.3(0.0) Introduced on the Z9000 platform.
Usage
Information
The following table illustrates the fields displayed in the output of this command:
Field Description
Link-bundle trigger threshold Threshold value that is the checkpoint,
exceeding which the link bundle is
marked as being over utilized and
alarm is generated
Slot Slot number where the high-Gigabit
port-channel resides
npuUnit Network Processign Unit (NPU)
number where the high-Gigabit port-
channel resides
number Number of the LAG bundle
Utilization (In Percent) Traffic usage in percentage of the
packets processed by the port channel
Alarm State Indicates whether an alarm is
generated if uneven utilization of the
Link Aggregation Control Protocol (LACP)
907