Administrator Guide

Output Statistics:
1335309 packets, 187184751 bytes, 0 underruns
0 64-byte pkts, 665971 over 64-byte pkts, 586727 over 127-
byte pkts
82038 over 255-byte pkts, 58 over 511-byte pkts, 515 over
1023-byte pkts
408949 Multicasts, 0 Broadcasts, 926163 Unicasts
0 throttles, 0 discarded, 0 collisions, 0 wredDrops
Rate info (interval 30 seconds):
Input 00.08 Mbits/sec, 10 packets/sec, 0.00% of
line-rate
Output 00.00 Mbits/sec, 3 packets/sec, 0.00% of
line-rate
Related
Commands
clear hardware system-flow — clears the statistics from selected hardware
components.
show interfaces stack-unit — displays information on all interfaces on a specific S-
Series stack member.
show system (S-Series and Z-Series) — displays the current status of all the stack
members or a specific member.
clear hardware stack-unit (for high-Gigabit Ethernet
ports)
Clear statistics from selected hardware components.
NOTE: Only the parameters that are newly introduced with this command in Release 9.3(0.0) are
explained here. For a complete description of all of the options that are available with this
command, refer the relevant Command Reference Guide of the applicable platform of Release
9.2(0.0).
Z9000
Syntax
clear hardware stack-unit number {counters | unit number
counters | hg-stats [unit number [port port-number]] | cpu
data-plane statistics | cpu i2c statistics | stack-port number}
Parameters
hg-stats [unit
unit-number
[port port-
number | no]]
Enter the keyword hg-stats to display high–Gigabit
Ethernet or backplane port buffer and queue statistics on the
selected stack member. Optionally, use the keyword
unit
with a number to select port-pipe 0 to 5, and then use port
port-number to select a port on that port-pipe.
For Z9000, valid backplane ports for leaf NPU units (units 0–
3) range from 34-41 and for spine NPU units (units 4–5)
range from 1 -16.
910
Link Aggregation Control Protocol (LACP)