Reference Guide

Version 8.3.1.9.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 6.2.1.1 Introduced on the E-Series.
Usage
Information
The unit of bandwidth percentage is 1%. A bandwidth percentage of 0 is allowed and disables
the scheduling of that class. If the sum of the bandwidth percentages given to all eight classes
exceeds 100%, the bandwidth percentage automatically scales down to 100%.
Related
Commands
qos-policy-output — creates a QoS output policy.
class-map
Create/access a class map. Class maps differentiate traffic so that you can apply separate quality-of-service policies to
each class.
Z9000
Syntax
class-map {match-all | match-any} class-map-name [layer2]
Parameters
match-all Determines how packets are evaluated when multiple match criteria
exist. Enter the keywords match-all to determine that the packets
must meet all the match criteria in order to be a member of the class.
match-any Determines how packets are evaluated when multiple match criteria
exist. Enter the keywords match-any to determine that the packets
must meet at least one of the match criteria in order to be a member
of the class.
class-map-name Enter a name of the class for the class map in a character format (32
character maximum).
layer2 Enter the keyword layer2 to specify a Layer 2 Class Map. The
default is
Layer 3.
Defaults Layer 3
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Class-map names can be 32 characters. Layer2 available on the C-
Series and S-Series.
1125