Reference Guide

Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.6.1.0 Introduced on the C-Series.
pre-Version
6.2.1.1
Introduced on the E-Series.
Usage
Information
This command ensures that route information being redistributed is converted to the same
metric value.
Related
Commands
redistribute — allows you to redistribute routes learned by other methods.
description
Enter a description of the RIP routing protocol.
Z9000
Syntax
description {description}
To remove the description, use the no description {description} command.
Parameters
description Enter a description to identify the RIP protocol (80 characters
maximum).
Defaults none
Command Modes ROUTER RIP
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.6.1.0 Introduced on the C-Series.
pre-Version
7.7.1.0
Introduced on the E-Series.
Related
Commands
router rip — enters ROUTER mode on the switch.
1169