Reference Guide

Example
FTOS#show user
Line User Host(s) Location
0 console 0 admin idle
* 3 vty 1 admin idle 172.31.1.4
FTOS#
Related
Commands
username — enables a user.
timeout login response
Specify how long the software waits for the login input (for example, the user name and password) before timing out.
Z9000
Syntax
timeout login response seconds
To return to the default values, use the no timeout login response command.
Parameters
seconds
Enter a number of seconds the software waits before logging you out.
The range is:
• VTY: the range is from 1 to 30 seconds, the default is 30
seconds.
• Console: the range is from 1 to 300 seconds, the default is 0
seconds (no timeout).
• AUX: the range is from 1 to 300 seconds, the default is 0
seconds (no timeout).
Defaults See the defaults settings shown in Parameters .
Command Modes LINE
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
Usage
Information
The software measures the period of inactivity defined in this command as the period between
consecutive keystrokes. For example, if your password is “password” you can enter “p” and
wait 29 seconds to enter the next letter.
1242