Reference Guide

show clock — displays the current clock settings.
clock timezone
Configure a timezone for the switch.
Z-Series
Syntax
clock timezone timezone-name offset
To delete a timezone configuration, use the no clock timezone command.
Parameters
timezone-name Enter the name of the timezone. You cannot use spaces.
offset Enter one of the following:
• a number from 1 to 23 as the number of hours in addition to
universal time coordinated (UTC) for the timezone.
• a minus sign (-) then a number from 1 to 23 as the number of
hours.
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
Usage
Information
Coordinated universal time (UTC) is the time standard based on the International Atomic Time
standard, commonly known as Greenwich Mean time. When determining system time, include
the differentiator between UTC and your local timezone. For example, San Jose, CA is the
Pacific Timezone with a UTC offset of -8.
1391