Reference Guide

show vlt detail
Displays detailed status information about VLT domains currently configured on the switch.
Z-Series
Syntax
show vlt detail
Default Not configured.
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.8.0 Introduced on the S4810.
Example
FTOS# FTOS(conf-if-vl-100)#show vlt detail
Local LAG Id Peer LAG Id Local Status Peer Status Active VLANs
------------ ----------- ------------ ------------
-------------
10 10 UP UP 100, 200, 300,
400,
show vlt inconsistency
Display run-time inconsistencies in the incoming interface (IIF) for spanned multicast routes.
Z9000
Syntax
show vlt inconsistency ip mroute
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 9.2(0.2) Introduced on the Z9000, S4810, and S4820T.
Example
FTOS#show vlt inconsistency ip mroute
Spanned Multicast Routing IIF Inconsistency
Multicast Route LocalIIF PeerIIF
--------------- ---------- ---------
(22.22.22.200, 225.1.1.2) VLAN 5 VLAN 6
1435