Reference Guide

Parameters
domain Display the VLT statistics for the domain.
multicast Display the VLT statistics for multicast.
mac Display the VLT statistics for the MAC address.
arp Display the VLT statistics for ARP.
igmp-snoop Display the VLT statistics for IGMP snooping.
ndp Display the VLT statistics for NDP.
Default Not configured.
Command Modes EXEC
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 9.2(0.2) Added parameters multicast and ndp
Version 9.0.0.0 Introduced on the Z9000.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Added support in the output for ARP, MAC, and IGMP snooping.
Version 8.3.8.0 Introduced on the S4810.
Related
Commands
clear vlt statistics — clears the statistics on VLT operations.
Example
NOTE: The following example shows the statistics for all of the VLT parameters. If you
enter a specific keyword, such as mac, only the statistics for that VLT parameter displays.
FTOS_VLTpeer1#show vlt statistics
VLT Statistics
----------------
HeartBeat Messages Sent: 930
HeartBeat Messages Received: 909
ICL Hello's Sent: 927
ICL Hello's Received: 910
Domain Mismatch Errors: 0
Version Mismatch Errors: 0
Config Mismatch Errors: 0
VLT MAC Statistics
----------------
L2 Info Pkts sent:6, L2 Mac-sync Pkts Sent:0
L2 Info Pkts Rcvd:3, L2 Mac-sync Pkts Rcvd:2
L2 Reg Request sent:1
L2 Reg Request rcvd:2
L2 Reg Response sent:1
L2 Reg Response rcvd:1
VLT Igmp-Snooping Statistics
-------------------------------
IGMP Info Pkts sent: 4
IGMP Info Pkts Rcvd: 1
IGMP Reg Request sent: 1
1438