Reference Guide

ge min-prefix-
length
(OPTIONAL) Enter the keyword ge and then enter the minimum prefix
length, which is a number from zero (0) to 32.
le max-prefix-
length
(OPTIONAL) Enter the keyword le and then enter the maximum prefix
length, which is a number from zero (0) to 32.
Command Modes PREFIX-LIST
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
Usage
Information
Sequence numbers for this filter are automatically assigned starting at sequence number 5.
If you do not use the ge or le options, only packets with an exact match to the prefix are
filtered.
Related
Commands
deny — configures a filter to drop packets.
seq — configures a drop or permit filter with a specified sequence number.
seq
To a deny or permit filter in a prefix list while configuring the filter, assign a sequence number.
Z9000
Syntax
seq sequence-number {deny | permit} {any} | [ip-prefix /nn {ge
min-prefix-length} {le max-prefix-length}] | [bitmask number]
To delete a specific filter, use the no seq sequence-number {deny | permit}
{any} | [ip-prefix {ge min-prefix-length} {le max-prefix-
length}] | [bitmask number].
Parameters
sequence-
number
Enter a number. The range is from 1 to 4294967294.
deny Enter the keyword deny to configure a filter to drop packets meeting
this condition..
permit Enter the keyword permit to configure a filter to forward packets
meeting this condition.
any (OPTIONAL) Enter the keyword any to match any packets.
211