Reference Guide

out (OPTIONAL) Enter the keyword out to view only BGP updates sent to
neighbors.
prefix-list prefix-
list-name
(OPTIONAL) Enter the keyword prefix-list then the name of an
established prefix list. If the prefix list is not configured, the default is
permit (to allow all routes).
ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted decimal
format.
peer-group-name (OPTIONAL) Enter the name of the peer group to disable or enable all
routers within the peer group.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Usage
Information
To remove all configured debug commands for BGP, enter the no debug ip bgp
command.
default-metric
Allows you to change the metric of redistributed routes to locally originated routes. Use this command with the
redistribute command.
Z9000
Syntax
default-metric number
To return to the default setting, use the no default-metric command.
Parameters
number Enter a number as the metric to be assigned to routes from other
protocols. The range is from 1 to 4294967295.
Defaults 0
Command Modes ROUTER BGP
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
288