Reference Guide

63.114.8.35 0 18508 ?
*> 4.0.0.0/8 63.114.8.33 0 18508 701 1 i
*> 4.2.49.12/30 63.114.8.33 0 18508 209 i
* 4.17.250.0/24 63.114.8.33 0 18508 209
1239 13716 i
*> 63.114.8.33 0 18508 701
1239 13716 i
* 4.21.132.0/23 63.114.8.33 0 18508 209
6461 16422 i
*> 63.114.8.33 0 18508 701
6461 16422 i
*> 4.24.118.16/30 63.114.8.33 0 18508 209 i
*> 4.24.145.0/30 63.114.8.33 0 18508 209 i
*> 4.24.187.12/30 63.114.8.33 0 18508 209 i
*> 4.24.202.0/30 63.114.8.33 0 18508 209 i
*> 4.25.88.0/30 63.114.8.33 0 18508 209
3561 3908 i
*> 5.0.0.0/9 63.114.8.33 0 0 18508 ?
*> 5.0.0.0/10 63.114.8.33 0 0 18508 ?
*> 5.0.0.0/11 63.114.8.33 0 0 18508 ?
--More--
Related
Commands
show ip bgp community — views the BGP communities.
neighbor maximum-prefix — controls the number of network prefixes received.
show ip bgp cluster-list
View BGP neighbors in a specific cluster.
Z-Series
Syntax
show ip bgp [ipv4 unicast] cluster-list [cluster-id]
Parameters
ipv4 unicast (OPTIONAL) Enter the keywords ipv4 unicast to view
information only related to ipv4 unicast routes.
cluster-id (OPTIONAL) Enter the cluster id in dotted decimal format. The range
is 1 — 4294967295.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
324