Reference Guide

Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 7.8.1.0 Introduced on the S-Series.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.6.1.0 Introduced on the E-Series.
MBGP Commands
Multiprotocol BGP (MBGP) is an enhanced BGP that enables multicast routing policy throughout the internet and
connecting multicast topologies between BGP and autonomous systems (ASs).
FTOS MBGP is implemented as per IETF RFC 1858.
BGPv4 is supported in the following:
FTOS Version Platform Support
7.8.1.0, MBGP for IPv6 TeraScale and C-Series
7.8.1.0, MBGP for IPv4
Multicast Only
S-Series
8.2.1.0, MBGP E-Series ExaScale
debug ip bgp dampening
View information on routes being dampened.
Z9000
Syntax
debug ip bgp ipv4 multicast dampening
To disable debugging, use the no debug ip bgp ipv4 multicast dampening
command.
Parameters
dampening Enter the keyword dampening to clear route flap dampening
information.
Command Modes EXEC Privilege
354