Reference Guide

Term Explanation
Stack-Unit Lists the stack unit or units that are checked. Entering all shows
the status for all stacks.
Portpipe Lists the portpipe (port-set) or port pipes (port-sets) that are
checked. Entering all shows the status for linecards and port-pipes
in the chassis.
CAM Partition Shows the CAM profile of the CAM.
Available CAM Identifies the amount of CAM space remaining for that profile.
Estimated CAM per
Port
Estimates the amount of CAM space the listed policy will require.
Status Indicates whether or not the policy will be allowed in the CAM.
Example (S-
Series)
FTOS#test cam-usage service-policy input LauraIn stack-unit all
Stack-Unit|Portpipe|CAM Partition|AvailableCAM|EstimatedCAM
per Port|Status
---------------------------------------------------------------
---------
0| 0| IPv4Flow|
102| 0|Allowed
0| 1| IPv4Flow|
102| 0|Allowed
FTOS#
!
FTOS#test cam-usage service-policy input LauraIn
stack-unit 0 port-set
1
Stack-Unit|Portpipe|CAM Partition|Available CAM|EstimatedCAM
per Port|Status
---------------------------------------------------------------
-----------
0| 1| IPv4Flow|
102| 0|Allowed
FTOS#
380