Reference Guide

10
Control Plane Policing (CoPP)
The CoPP commands are supported on the Dell Networking Z9000 platform.
control-plane-cpuqos
To manage control-plane traffic, enter control-plane mode and configure the switch.
Z9000
Syntax
control-plane-cpuqos
Defaults Not configured.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.8.0 Introduced on the S4810.
service-policy rate-limit-cpu-queues
Apply a policy map for the system to rate limit control traffic on a per-queue basis.
Z9000
Syntax
service-policy rate-limit-cpu-queues policy-name
Parameters
policy-name Enter the service-policy name, using a string up to 32 characters.
Defaults Not configured.
Command Modes CONTROL-PLANE-CPUQOS
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
381