Manualshelf

Reference Guide

ManualsBrandsDell ManualsComputer equipmentForce10 Z9000
411412413414415416417418419420
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the C-Series and S-Series.
show ip dhcp server
Display the DHCP server statistics.
Z9000
Syntax
show ip dhcp server statistics
Defaults none
Command Modes EXEC Privilege
Command History
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the C-Series and S-Series.
Commands to Configure Secure DHCP
DHCP, as defined by RFC 2131, provides no authentication or security mechanisms. Secure DHCP is a suite of features
that protects networks that use dynamic address allocation from spoofing and attacks.
arp inspection
Enable dynamic arp inspection (DAI) on a VLAN.
Z-Series
Syntax
arp inspection
Defaults Disabled
Command Modes INTERFACE VLAN
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant
FTOS Command Line Reference Guide
.
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
414