Reference Guide

ip ip-address
mask
(OPTIONAL) Enter the keyword ip then an IP address in the dotted
decimal format. Enter the optional IP address mask in the slash prefix
format (/ x).
inspection Enter the keyword inspection with one of the following keywords
to view ARP entries:
• database — view a list of ARP entries learned using DAI
• statistics — view DAI statistics
macaddress
mac-address
mask
(OPTIONAL) Enter the keyword macaddress then a MAC address in
nn:nn:nn:nn:nn:nn format. Enter the optional MAC address mask in
nn:nn:nn:nn:nn format also.
static (OPTIONAL) Enter the keyword static to view entries entered
manually.
retries (OPTIONAL) Enter the keyword retries to show the number of ARP
retries before a 20–second back off.
dynamic (OPTIONAL) Enter the keyword dynamic to view dynamic entries.
summary (OPTIONAL) Enter the keyword summary to view a summary of ARP
entries.
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Added support for 4094 VLANs on the E-Series ExaScale (the prior
limit was 2094).
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.9.1.0 Introduced VRF on the E-Series.
Version 7.8.1.0 Augmented to display local ARP entries learned from private VLANs
(PVLANs).
Version 7.6.1.0 Introduced on the S-Series.
Version 7.5.1.0 Introduced on the C-Series.
pre-Version
6.1.1.0
Introduced on the E-Series.
606