Reference Guide

flap-statistics (OPTIONAL) Enter the keywords flap-statistics to view flap
statistics on the neighbor’s routes.
routes (OPTIONAL) Enter the keyword routes to view only the neighbor’s
feasible routes.
received-routes
[ network
[ network-mask ]
(OPTIONAL) Enter the keywords received-routes then either
the network address (in dotted decimal format) or the network mask
(in slash prefix format) to view all information received from
neighbors.
NOTE: You must configure the neighbor soft-
reconfiguration inbound
command prior to viewing all
the information received from the neighbors.
denied-routes
[ network
[ network-mask ]
(OPTIONAL) Enter the keywords denied-routes then either the
network address (in dotted decimal format) or the network mask (in
slash prefix format) to view all information on routes denied using
neighbor inbound filters.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.1.0 Added support for IPv4 multicast and IPv6 unicast address families
Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.8.1.0 Introduced on the S4810.
Version 7.7.1.0 Introduced on the C-Series.
Version 7.5.1.0 Added the detail option. Output now displays the default MED
value.
Version 7.2.1.0 Added the received and denied route options.
Version 6.3.10 The output is changed to display the total number of advertised
prefixes.
Usage
Information
The following describes the show ip bgp ipv6 unicast neighbors command
shown in the Example below.
Lines Beginning
With
Description
BGP neighbor Displays the BGP neighbor address and its AS number. The last
phrase in the line indicates whether the link between the BGP router
743