Reference Guide

FTOS con0 now available
Press RETURN to get started.
4d21h6m: %RPM0-P:CP %SEC-5-LOGIN_SUCCESS: Login successful for
user on line
console
This is the banner
FTOS>
Related
Commands
banner login — sets a banner for login connections to the system.
banner motd — sets a Message of the Day banner.
exec-banner — Enables the display of a text string when you enter EXEC mode.
line — enables and configures the console and virtual terminal lines to the system.
banner login
Set a banner to display when logging on to the system.
Z9000
Syntax
banner login {keyboard-interactive | no keyboard-interactive}
[c line c]
Parameters
keyboard-
interactive
Enter the keyword keyboard-interactive to require a
carriage return (CR) to get the message banner prompt.
c Enter a delineator character to specify the limits of the text banner.
The delineator is a percent character (%).
line Enter a text string for your text banner message ending the message
with your delineator. The delineator is a percent character (%).
Range: maximum of 50 lines, up to 255 characters per line
Defaults No banner is configured and the CR is required when creating a banner.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.12.0 Introduced on the S4810.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.2.1.0 Introduced the keyword keyboard-interactive.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.6.1.0 Introduced on the S-Series.
77