Reference Guide

Version 8.2.1.0 Introduced on the E-Series ExaScale.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
Usage
Information
When you enable the bgp non-deterministic-med command, the show ip bgp
command output for a BGP route does not list the INACTIVE reason.
show ip bgp ipv6 unicast cluster-list
View BGP neighbors in a specific cluster.
Z9000
Syntax
show ip bgp ipv6 unicast cluster-list [cluster-id]
Paramters
cluster-id (OPTIONAL) Enter the cluster id in dotted decimal format.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, refer to the
relevant FTOS Command Line Reference Guide .
The following is a list of the FTOS version history for this command.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.4.2.1 Introduced on the C-Series and S4810.
Version 7.4.1.0 Introduced on the E-Series TeraScale.
show ip bgp ipv6 unicast community
View information on all routes with community attributes or view specific BGP community groups.
Z9000
Syntax
show ip bgp ipv6 unicast community [community-number] [local-
as] [no-export] [no-advertise]
Paramters
community-
number
Enter the community number in AA:NN format where AA is the AS
number (2 bytes) and NN is a value specific to that autonomous
system. You can specify up to eight community numbers to view
information on those community groups.
772